B.meter
C.Rate
D.Speed
E.velocity
F.slope
G.refrence point
PLS HELP NOW !!!
Speed can be calculated if you know the distance that an object travels in one unit of time, therefore the correct answer is option D.
The total distance covered by any object per unit of time is known as speed. It depends only on the magnitude of the moving object.
The unit of speed is a meter/second. The generally considered unit for speed is a meter per second.
Thus, Speed can be calculated if you know the distance that an object travels in one unit of time, therefore the correct answer is option D.
Learn more about speed from here, refer to the link;
#SPJ2
Answer:
D.Speed
Explanation:
The speed of an object is the distance the object travels in one unit of time.
Answer:
Solvent
Explanation:
B. It gives off only one wavelength of electromagnetic radiation
C. It releases only ultraviolet waves of electromagnetic radiation
D. It becomes hotter but gives off less electromagnetic radiation
The black body radiator as it increases in temperature gives off a range of electromagnetic radiation of shorter wavelengths so, the option A is correct.
Radiation is the movement of atomic and subatomic particles as well as waves, such as those that define X-rays, heat rays, and light rays. Radiation of both types, from cosmic and earthly sources, is constantly being thrown at all matter.
The characteristics and behavior of radiation, as well as the matter it interacts with, are outlined in this article, which also explains how energy is transferred from radiation to its surroundings.
The effects of such an energy transfer to living matter, including the typical effects on numerous biological processes, are given a great deal of attention (e.g., photosynthesis in plants and vision in animals).
Thus, the black body radiator gives off a range of electromagnetic radiation of shorter wavelengths.
To know more about radiation:
#SPJ2
Answer: A
Explanation:
Answer is a hope this helps guys!
Answer:
Volume of gasoline spills out is 0.943 L.
Explanation:
Volumetric expansion of both gasoline and steel tank is :
{ source Internet}
We know expansion due to temperature change is :
For gasoline:
Similarly for Steel tank:
.
Now, volume of gasoline spills out is equal to difference between expansion in volume.
the type of tire and the type of fuel
only the maximum speed
only the angle of the rear spoiler
Answer:
the type of tire and the type of fuel
Explanation:
Answer:
The volume flow rate is 3.27m³/s
Diameter at the refinery is 88.64cm
Explanation:
Given
At the wellhead
Pipes diameter, d2 = 59.1cm = 0.591m
Flow speed of petroleum f2 = 11.9m/s
At the refinery,
Pipes diameter, d1 = ? Unknown
Flow speed of petroleum, f1 = 5.29m/s
Calculating the volume flow rate of petroleum along the pipe.
Volume flow rate = Flow rate * Area along the pipe
V = 11.9 * πd²/4
V = 11.9 * 22/7 * 0.591²/4
V = 3.265778m³/s
The volume flow rate is 3.27m³/s -------- Approximated
Since it's not stated if the flowrate is uniform throughout the pipe, we'll assume that flow rate is the same through out...
Using V1A1 = V2A2, where V1 & V2 Volume flow rate at both ends and area = Area of pipes at both ends
This gives;
V1A1 = V1A2
V1*πd1²/4 = V2 * πd2²/4 ----------- Divide through by π/4
So, we are left with
V1d1² = V2d2²
5.29 * d1²= 11.9 * 59.1²
d1² = 11.9 * 59.1²/5.29
d1² = 7857.172
d1 = √7857.172
d1 = 88.6406904305240618
d1 = 88.64cm --------------- Approximated