Answer:
Please find the attached file for the figure.
Explanation:
Given that a bicyclist speeds along a road at 10 m/s for 6 seconds.
Its acceleration = 10/6 = 1.667 m/s^2
The distance covered = 1/2 × 10 × 6
Distance covered = 30 m
That is, displacement = 30 m
Then she stops for three seconds to make a 180˚ turn and then travels at 5 m/s for 3 seconds.
The acceleration = 5/3 = 1.667 m/s^2
The displacement = 1/2 × 5 × 3
Displacement = 7.5 m
The resultant acceleration will be equal to zero.
While the resultant displacement will be:
Displacement = 30 - 7.5 = 22.5 m
Please find the attached file for the sketch.
The gravitational force minus any contact forces acting on an object
The difference between the normal force and the gravitational force acting on an object
The sum of all the forces acting on an object in the same direction
The sum of all forces acting on an object in the same direction is described for the net force acting on an object.
Example : If two forces (2 kids pushing in the same direction to move the object big box) act on an object (big box) in the same direction, then the net force is equal to the sum of the two forces. If the kids pushed in the opposite direction, the net force will not occur.
Hence, Option D is the correct answer.
Learn more about Net force,
#SPJ6
Answer:
The sum of all the forces acting on an object in the same direction.
My opinion is Hinata...just saying
Answer:
hinata for sure
Explanation:
seems reasonable
Answer:
* roller skates and ice skates.
* roller coaster
Explanation:
One of the best examples for this situation is when we are skating, in the initial part we must create work with a force, it compensates to move, after this the external force stops working and we continue movements with kinetic energy, if there are some ramps, we can going up, where the kinetic energy is transformed into potential energy and when going down again it is transformed into kinetic energy. This is true for both roller skates and ice skates.
Another example is the roller coaster, in this case the motor creates work to increase the energy of the car by raising it, when it reaches the top the motor is disconnected, and all the movement is carried out with changes in kinetic and potential energy. In the upper part the energy is almost all potential, it only has the kinetic energy necessary to continue the movement and in the lower part it is all kinetic; At the end of the tour, the brakes are applied that bring about the non-conservative forces that decrease the mechanical energy, transforming it into heat.
Answer:
Explanation:
Step one:
Given
mass m= 0.32kg
intital velocity, u= 14m/s
final velocity v= 22m/s
time= 0.06s
Step two:
Required
Force F
the expression for the force is
F=mΔv/t
F=0.32*(22-14)/0.06
F=(0.32*8)/0.06
F=2.56/0.06
F=42.67N
The average force exerted on the bat 42.67N
Explanation:
For equilibrium, .
So, = 0
=
= 705.6 N
Also, for equilibrium = 0
= 0
or,
=
= 176.4 N
Thus, we can conclude that the tension in the first rope is 176.4 N.
solution, suspension, colloid
O suspension, colloid, solution
O suspension, solution, colloid
The order of mixtures according to their particle size from smallest to the largest is: solution< colloid< suspension. So, the first option is correct.
Solvent is defined as the substance in which the solute particles dissolve and forms a mixture. Solute is defined as the particles that get dissolved in the solvent to form the mixture.
Here,
The particles of the solutions, colloids and suspension varies according to their size and the type of mixture they comes under.
Colloid is a heterogenous mixture, that means it has a non-uniform composition of particles. In colloid, the particles have an intermediate size between 1 nm to 1000 nm which is the size range between that of solution and suspension.
Solution is a homogenous mixture in which the particles have a diameter of less than 1 nm. The size of the particles in solution is the smallest when compared to that of colloid and suspension.
Suspension is a homogenous mixture in which the size of the particles is larger than 10000 nm. The particles of suspension are the largest among the particles of colloid and solution.
Hence,
The order of mixtures according to their particle size from smallest to the largest is: solution< colloid< suspension.
To learn more about solute and solvent, click:
#SPJ7
Answer:
Explanation: