Force is equal to the mass of that object multiplied by itsacceleration:
F = m × aB.49 N is the ANSWER! I took the test on k12 and it was right
Explanation :
Given that,
Velocity of the car, v = 20 m/s
Kinetic energy of the car,
Kinetic energy is given by :
So,
m = 900 kg
Hence, the mass of the car is 900 kg
Answer:
3.117 m
Explanation:
Given that:
the distance of separation between speaker A and speaker B (L) = 6.69 m
Frequency (F) = 750 -Hz tone
Velocity of speed of sound = 343 m/s
The distance from Speaker A to the first point (L₁) on the line can be calculated by using the formula:
where A =
we have:
∴ the distance from speaker A to the first point on the line between the speakers where constructive interference occurs = 3.117 m
The first thing you should do after retrieving a boat onto a trailer is to secure the boat to the trailer. This is important to ensure the boat remains stable and safe during transportation.
Here are the steps to secure the boat to the trailer:
1. Position the boat properly: Align the boat on the trailer so that it is centered and evenly distributed. Make sure the boat is positioned in such a way that the weight is balanced and evenly distributed across the trailer.
2. Attach the bow strap: The bow strap is a strong, adjustable strap that is used to secure the front (bow) of the boat to the trailer. Connect one end of the bow strap to the trailer and the other end to a secure point on the boat's bow. Make sure the strap is tight and secure, but not overly tightened to the point of damaging the boat.
3. Connect the stern tie-downs: Stern tie-downs are straps or ropes used to secure the rear (stern) of the boat to the trailer. Attach one end of each stern tie-down to the trailer and the other end to a secure point on the boat's stern. Make sure the stern tie-downs are tight and secure, but again, avoid over-tightening.
4. Check the connections: After attaching the bow strap and stern tie-downs, double-check all the connections to ensure they are properly secured. Give each strap a gentle tug to make sure it is tight and won't come loose during transport.
5. Secure loose items: Before hitting the road, secure any loose items in the boat, such as life jackets, paddles, or fishing gear. These items should be properly stowed and secured to prevent them from shifting or falling out during transportation.
Know more about trailer:
#SPJ2
Answer:
Set the parking brake of the towing vehicle, and put it in park (or first gear if you have a manual transmission).
Move the vessel onto the trailer far enough to attach the winch line to the bow eye of the vessel. ...
Shut off the engine, and raise the engine or outdrive.
Pull the vessel out of the water.
Explanation:
Express your answer to two significant figures and include the appropriate units.
Answer:
Explanation:
given,
Speed of sound = 343 m/s
frequency of horn = 260 Hz
the friend is approaching, the frequency is increased by the Doppler Effect. The frequency is 266 Hz
using formula
the speed of friends approaching is equal to
The speed are they moving at will be 0.5 m/sec.Law of conservation of momentum is applied.
According to the law of conservation of momentum, the momentum of the body before the collision is always equal to the momentum of the body after the collision.
The given data in the problem is;
(m₁) is the mass of 1st gilder= 0.40 kg
(u₁) is the initial velocity = 2 m/s
(m₂) is the mass of 2nd gilder = 1.20 kg
(u₂) is the initial velocity of 2nd gilder = 0 m/s
(v) is the velocity after collision =.?
According to the law of conservation of momentum;
Momentum before collision =Momentum after collision
Hence, the speed are they moving at will be 0.5 m/sec
To learn more about the law of conservation of momentum refer;
#SPJ2