Answer:
The answer is below
Explanation:
a) The location ӯ of the center of mass G of the pendulum is given as:
b) the mass moment of inertia about z axis passing the rotation center O is:
c) The mass moment of inertia about z axis passing the rotation center O is:
To solve this problem, calculate the mass of each element of the pendulum, use that information to determine the center of mass, and then apply the parallel axis theorem to calculate the two moments of inertia.
To determine the center of mass and the mass moment of inertia of the pendulum, first we calculate the individual masses of the rods: AB and OC, and the plate. Each rod has a mass of 2 kg (given mass per unit length is 3kg/m and length of each rod is 1 m from the first reference paragraph).
The center of mass ӯ can be determined using the formula for center of mass, averaging distances to each mass element weighted by their individual masses. The mass moment of inertia, also known as the angular mass, for rotation about the z axis through G is determined using the parallel axis theorem, which states that the moment of inertia about an axis parallel to and a distance D away from an axis through the center of mass is the sum of the moment of inertia for rotation about the center of mass and the total mass of the body times D squared.
Finally, the moment of inertia about the z axis passing through the center of rotation O can be calculated again using the parallel axis theorem, with distance d being the distance between points G and O.
#SPJ3
circulararc whose radius is 0.29 m. What isthe speed of the
ball?
Answer:
v = 0.85 m/s
Explanation:
Given that,
Mass of the ball, m = 0.01 kg
Centripetal force on the ball, F = 0.025 N
Radius of the circular path, r = 0.29 m
Let v is the speed of the ball. The centripetal force of the ball is given by :
v = 0.85 m/s
So, the speed of the ball is 0.85 m/s. Hence, this is the required solution.
Increase the mass of the car slightly.
Decrease the launch speed of the car slightly.
Increase the launch speed of the car slightly.
Answer:
we see that to increase the energy of the expensive we must increase the launch speed, since it increases quadratically
Explanation:
Kinetic energy is
K = ½ m v²
the speed of the expensive we can find it r
v² = v₀² + 2 a x
we can find acceleration with Newton's second law
F = m a
a = F / m
F= cte
substitute in the velocity equation
v² = v₀² + 2 F/m x
let's substitute in the kinetic energize equation
K = ½ m (v₀² + 2 F/m x)
K = ½ m v₀² + f x
we see that the kinetic energy depends on two tomines
in January in these systems the force for launching is constant, which is why decreasing the mass increases the speed of the vehicle and therefore increases the kinetic energy
As the launch speed increases the initial energy increases quadratically
we see that to increase the energy of the expensive we must increase the launch speed, since it increases quadratically
Given :
A 5-kg moving at 6 m/s collided with a 1-kg ball at rest.
The ball bounce off each other and the second ball moves in the same direction as the first ball at 10 m/sec.
To Find :
The velocity of the first ball after the collision.
Solution :
We know, by conservation of momentum :
Putting all given values with directions ( one side +ve and other side -ve ).
Therefore, the velocity of first ball after the collision is 4 m/s after in opposite direction.
Hence, this is the required solution.
Answer:
Explanation:
Let T and U represent the tensions in the 41° and 63° cables, respectively. In order for the system to be stationary, the horizontal components of these tensions must balance, and the vertical components of these tensions must total 200 N.
Tcos(41°) =Ucos(63°) . . . . . balance of horizontal components
U = Tcos(41°)/cos(63°) . . . . write an expression for U
__
The vertical components must total 200 N, so we have ....
Tsin(41°) +Usin(63°) = 200
Tsin(41°) +Tcos(41°)sin(63°)/cos(63°) = 200
T(sin(41°)cos(63°) +cos(41°)sin(63°))/cos(63°) = 200
T = 200cos(63°)/sin(41° +63°) ≈ 93.6 . . . newtons
U = 200cos(41°)/sin(41° +63°) ≈ 155.6 . . . newtons
__
The vertical cable must have sufficient tension to balance the weight of the traffic light, so its tension is 200 N.
Then the tensions in the 3 cables are ...
41°: 93.6 N
63°: 155.6 N
90°: 200 N
The tension in each of the three cables are 94.29, 155.56 and 200 Newton respectively.
Given the following data:
First of all, we would determine the third tension force based on the vertical component as follows:
Next, we would apply Lami's theorem to resolve the forces acting on the traffic light at equilibrium:
For the horizontal component:
....equation 1.
For the vertical component:
...equation 2.
Substituting eqn. 1 into eqn. 2, we have:
For the first tension:
Read more on tension here: brainly.com/question/4080400
3. Thu Tran, another Physics 2A student, grabs the ball and kicks it straight up to Hoai Nguyen, who is still up on the building rooftop. Assuming that the ball is kicked at 0.50 m above the ground and it goes on a vertical path, what is the minimum velocity required for the ball to make it to the building rooftop? Ignore air resistance. (Hint: the ball will pass the rooftop level with a higher speed...)
Answer:
1. 53.415 m
2. 32.373 m/s
3. 30.82 m/s
Explanation:
Let g = 9.81 m/s2. We can use the following equation of motion to calculate the distance traveled by the ball in 3.3s, and the velocity it achieved
1.
2.
3. If the ball is kicked at 0.5 m above the ground then the net distance between the ball and the roof top is
53.415 - 0.5 = 48.415 m
For the ball to at least make it to the roof top at speed v = 0 m/s. We can use the following equation of motion to calculate the minimum initial speed
where v = 0 m/s is the final velocity of the ball when it reaches the rooftop, is the initial velocity, is the distance traveled, g = -9.81 is the gravitational acceleration with direction opposite with velocity