During the first year of operation, 2018, McGinnis Appliance recognized $340,000 of service revenue on account. At the end of 2018, the accounts receivable balance was $66,836. Even though this is his first year in business, the owner believes he will collect all but about 5 percent of the ending balance. Required What amount of cash was collected by McGinnis during 2018
Answers
Answer:
$273,164
Explanation:
Data given in the question
Recognized amount of service revenue = $340,000
And, the account receivable balance is $66,836
So, by considering the above information, the amount of cash collected is
= Recognized amount of service revenue - the account receivable balance
= $340,000 - $66,836
= $273,164
By deducting the account receivable balance from the service revenue recognized amount we can get the cash collected amount
Related Questions
Mankiw discusses Giffen goods as a possible counterexample to the law of demand. Although not explicitly mentioned by Mankiw, Veblen goods are another possible exception to the law of demand. Perform a quick web search to answer the following: a. What is a Veblen good?b. What is an example of a Veblen good? c. Why do some consumers purchase Veblen goods?
Chuck, a single taxpayer, earns $75,000 in taxable income and $10,000 in interest from an investment in City of Heflin bonds. (Use the US tax rate schedule)Required:a. If Chuck earns an additional $40,000 of taxable income, what is his marginal tax rate on this income?b. What is his marginal rate if, instead, he had $40,000 of additional deductions?
Buerhle Company needs to determine if its indefinite-life intangibles other than goodwill have been impaired and should be reduced or written off on its balance sheet. The impairment test(s) to be used is (are) ______________. A. Both recoverability test and fair value test B. Recoverability test but not fair value test C. Not recoverability test but fair value test D. Neither recoverability test nor fair value test
A company plans to enclose three parallel rectangular areas for sorting returned goods. The three areas are within one large rectangular area and yd of fencing is available. What is the largest total area that can be enclosed
2. Incurred manufacturing overhead costs as follows: indirect materials $17,000 (including broom polish and specially crafted scissors to trim stray twigs), indirect labor $20,000 (Hansel and Gretel clean the shop and run errands for the elves), depreciation expense on equipment $12,000 (Broomhilda has multiple molding stations for each broom she creates), and various other manufacturing overhead costs on account $16,000.
3. Assigned direct materials and direct labor to jobs as follows:
Job no. Direct Materials Direct Labor
50 10,000 5,000
51 39,000 25,000
52 30,000 20,000
Required:
a. Calculate the predetermined overhead rate for September, assuming Broomhilda estimates total manufacturing overhead costs of $840,000 and direct labor costs of $700,000 for September.
b. Open job cost sheets for Jobs 50, 51, and 52. Enter the September 1 balances on the job cost sheet for Job 50.
c. Prepare the journal entries to record the purchase of raw materials, and the manufacturing overhead costs incurred during the month of March.
d. Prepare the summary journal entries to record the assignment of direct materials, direct labor, and manufacturing overhead costs to production. In assigning overhead costs, use the overhead rate calculated in (1). Post all costs to the job cost sheets as necessary.
e. Total the job cost sheets for any job(s) completed during the month. Prepare the journal entry (or entries) to record the completion of any job(s) during the month.
f. Prepare the journal entry (or entries) to record the sale of any job(s) during the month.
g. What is the balance in the Finished Goods Inventory account at the end of the month? What job(s) does this balance consist of? 8. What is the amount of over- or underapplied overhead? Prepare the journal entry to close this to Cost of Goods Sold
Answers
Answer:
Broomhilda
a. Predetermined overhead rate = overhead costs/direct labor costs
= $840,000/$700,000
= $1.20 per direct labor cost
b. Job Cost Sheets for Job 50 Job 51 Job 52
Beginning balances:
Direct materials $20,000
Direct labor $12,000
Manufacturing overhead $16,000
c. Journal Entries for the purchase of raw materials and manufacturing overhead costs:
Debit Raw materials $90,000
Credit Accounts Payable $90,000
To record the purchase of raw materials on account.
Debit Manufacturing overhead $65,000
Credit Raw materials $17,000
Credit Wages $20,000
Credit Depreciation expense $12,000
To record the manufacturing overhead incurred.
d. Debit Job 50 $21,000
Credit Raw materials $10,000
Credit Direct labor $5,000
Credit Manufacturing overhead $6,000
To record the assignment of direct materials, direct labor, and manufacturing overhead costs to Job 50.
Debit Job 51 $94,000
Credit Raw materials $39,000
Credit Direct labor $25,000
Credit Manufacturing overhead $30,000
To record the assignment of direct materials, direct labor, and manufacturing overhead costs to Job 51
Debit Job 52 $74,000
Credit Raw materials $30,000
Credit Direct labor $20,000
Credit Manufacturing overhead $24,000
To record the assignment of direct materials, direct labor, and manufacturing overhead costs to Job 52
e. Job Cost Sheets for Job 50 Job 51 Job 52
Beginning balances:
Direct materials $20,000
Direct labor $12,000
Manufacturing overhead $16,000
Direct materials $10,000 $39,000 $30,000
Direct labor $5,000 $25,000 $20,000
Manufacturing overhead $6,000 $30,000 $24,000
Total $69,000 $94,000
f. Debit Accounts Receivable $280,000
Credit Sales Revenue $280,000
To record the sale of goods (Jobs 49 and 50 for $122,000 and $158,000, respectively).
Debit Cost of Goods Sold $159,000
Credit Job 49 $90,000
Credit Job 50 $69,000
To record the cost of goods sold for Jobs 49 and 50.
g. Finished Goods Inventory balance = $94,000
This balance consists of Raw materials $39,000, Direct labor $25,000, and Manufacturing overhead $30,000 for Job 51.
h. The amount of over-or underapplied overhead:
Overhead incurred = $65,000
Overhead applied = $60,000
Underapplied = $5,000
Debit Cost of Goods Sold $5,000
Credit Manufacturing overhead $5,000
To close the underapplied overhead to the cost of goods sold.
Explanation:
Jobs 50 costs prior to September:
direct materials $20,000,
direct labor $12,000, and
manufacturing overhead $16,000
Total costs so far = $$48,000
Job 49 completed at a cost of $90,000
Beginning balance of Raw Materials Inventory = $15,000
Started Jobs 51 and 52, completed Jobs 50 and 51
Sold Jobs 49 and 50 on account for $122,000 and $158,000, respectively.
Additional events:
Raw materials purchased on account = $90,000
Manufacturing overhead incurred:
indirect materials $17,000
indirect labor $20,000
depreciation expense on equipment $12,000
Various manufacturing overhead = $16,000
Total = $65,000
Assignment of direct materials and direct labor to jobs:
Job no. Direct Materials Direct Labor Manufacturing overhead
50 10,000 5,000 $6,000
51 39,000 25,000 $30,000
52 30,000 20,000 $24,000
Estimated total manufacturing overhead costs = $840,000
Estimated direct labor costs = $700,000
Predetermined overhead rate = overhead costs/direct labor costs
= $840,000/$700,000
= $1.20 per direct labor cost
Answers
The cost of direct material used during the period would be $1,24,000.
What is inventory?
Inventory is an asset because the company invents money in that, it is the stock used in a particular business it starts with an opening balance of inventory and ends with its closing balance.
The cost of goods sold is the cost of the product which is sold during the year.
The formula for computing cost of goods sold(COGS):
OS= Opening Stock,
CS= Closing Stock.
Computation of cost of direct material:
Given that,
Opening stock of raw material = $27,000,
Closing stock of raw material = $28,000,
Purchases = $72,000 ($1,00,000-$28,000)
Putting the given values in the above formula, we get:
Hence, the cost of direct materials used during the period would be $1,27,000.
Learn more about inventory, refer:
Final answer:
The cost of the direct materials used during the year is $74,000. This was computed by adding the beginning raw materials inventory and purchases, then subtracting the end-year inventory and the indirect materials.
Explanation:
To calculate the cost of direct materials used during the period, you will need to take the beginning raw materials inventory, add the purchases made during the year, and then subtract the end of the year inventory and the indirect materials.
In this case, the calculation would be as follows: $27,000 (beginning inventory) + $100,000 (purchases) - $25,000 (ending inventory) - $28,000 (indirect materials) = $74,000. So the cost of direct materials used during the year is $74,000.
This calculation is part of managerial accounting, where it's crucial to keep track of direct and indirect costs to calculate the cost of goods manufactured and eventually obtain the cost of goods sold.
Learn more about Direct Materials Cost here:
#SPJ11
Answers
Answer:
NONE
Explanation:
The treasury stock sales increase additional paid-in capital treasury stock. It do not generate net income the stokc are part of equity transactions. They cannot generate a gain, the differnece in value betwene cost and reissuance of the shares will be adjusted against additional paid-in capital Treasu Stock as state before.
Market
Minneapolis Medical Dental
Sales $ 330,000 100 % $ 220,000 100 % $ 110,000 100 %
Variable expenses 198,000 60 % 143,000 65 % 55,000 50 %
Contribution margin 132,000 40 % 77,000 35 % 55,000 50 %
Traceable fixed expenses 39,600 12 % 11,000 5 % 28,600 26 %
Market segment margin 92,400 28 % $ 66,000 30 % $ 26,400 24 %
Common fixed expenses
not traceable to markets 9,900 3 %
Office segment margin $ 82,500 25 %
The company would like to initiate an intensive advertising campaign in one of the two market segments during the next month. The campaign would cost $4,400. Marketing studies indicate that such a campaign would increase sales in the Medical market by $38,500 or increase sales in the Dental market by $33,000.
Required:
Calculate the increased segment margin.for Medical:
Calculate the increased segment margin for Dental:
Answers
Answer:
Increase Segment margin for Medial = $9,075
Increase Segment margin for Dental = $12,100
Explanation:
The calculation of increased segment margin.for Medical and Dental is shown below:-
Medical Dental
Incremental Sales $38,500 $33,000
Less: Variable Cost ($25,025) ($16,500)
(Medical 65% and ($38,500 × 65%) ($33,000 × 50%)
Dental 50%)
Incremental
Contribution Margin $13,475 $16,500
Less: Traceable
Advertising Cost ($4,400) ($4,400)
Increase Segment
Margin $9,075 $12,100
Answers
Answer: C.$96,000
Explanation:
The Depreciation Tax Shield refers to how much in taxes are being saved by the company for depreciating an asset because Depreciation is tax deductible.
Depreciation Tax Shield = Tax Rate * Depreciation Amount for year
= 30% * ( 1,000,000 * 32%)
= 30% * 320,000
= $96,000
By claiming a Depreciation of $320,000 in Year 2, the depreciable asset saved the company $96,000 in taxes.
Balance, 1/1/2017 290 $5.00 $1450
Purchase, 1/15/2017 140 ..5.10 714
Purchase, 1/28/2017 140 ..5.30 742
An end of the month (1/31/2017) inventory showed that 230 units were on hand. If the company uses LIFO, what is the value of the ending inventory?
Answers
Answer:
Ending inventory= $1706
Explanation:
Giving the following information:
Units Per unit price Total
1/1/2017: 290 *$5.00= $1450
1/15/2017: Purchase, 140*$5.10= $714
1/28/2017: Purchase, 140*$5.30= $742
At the end of the month (1/31/2017) inventory showed that 230 units. If the company uses LIFO (last-in, first-out)
Ending inventory= 140*5.30+140*5.10+50*5= $1706