Answer:
Explanation:
Using the law of conservation of momentum to solve the problem. According to the law, the sum of momentum of the bodies before collision is equal to the sum of the bodies after collision. The bodies move with the same velocity after collision.
Mathematically.
mu + MU = (m+M)v
m and M are the masses of the bullet and the block respectively
u and U are their respective velocities
v is their common velocity
from the question, the following parameters are given;
m = 20g = 0.02kg
u = 960m/s
M = 4.5kg
U =0m/s (block is at rest)
Substituting this values into the formula above to get v;
0.02(960)+4.5(0) = (0.02+4.5)v
19.2+0 = 4.52v
4.52v = 19.2
Dividing both sides by 4.52
4.52v/4.52 = 19.2/4.52
v = 4.25m/s
Since they have the same velocity after collision, then the speed of the block immediately after the collision is also 4.25m/s
Answer
Explanation:
given
where
now we know
..................(i)
where dx is infinitesimal distance
for x = a and b = 0
after integration we get
we know work done by conservative force will be equals to negative of potential energy
so we get
Answer:
475 N/C
Explanation:
As we know that, the electric field in parallel plate capacitor is same (constant) throughout. And is potential gradient.
So, Electric field is given by
Electric field = potential gradient
Here, the potential change is 3.8V and the distance from negative plate to positive plate is 1.6 cm. The potential from negative plate to the center is (1.6/2)cm i.e., 0.8 cm.
But we have to take distance in SI units So, distance=
So, Electric field is
So, electric field is 475 Volts per meter.
Note : Also we can say 475 Newtons per coulomb
The dielectric plate is now slowly pulled out of the capacitor, which remains connected to the battery. Find the energy U2 of the capacitor at the moment when the capacitor is half-filled with the dielectric.
Answer:
U_eq = 1.99 * 10^(-10) J
Explanation:
Given:
Plate Area = 10 cm^2
d = 0.01 m
k_dielectric = 3
k_air = 1
V = 15 V
e_o = 8.85 * 10 ^-12 C^2 / N .m
Equations used:
U = 0.5 C*V^2 .... Eq 1
C = e_o * k*A /d .... Eq 2
U_i = 0.5 e_o * k_i*A_i*V^2 /d ... Eq 3
For plate to be half filled by di-electric and half filled by air A_1 = A_2 = 0.5 A:
U_electric = 0.5 e_o * k_1*A*V^2 /2*d
U_air = 0.5 e_o * k_2*A*V^2 /2*d
The total Energy is:
U_eq = U_electric + U_air
U_eq = 0.5 e_o * k_1*A*V^2 /2*d + 0.5 e_o * k_2*A*V^2 /2*d
U_eq = (k_1 + k_2) * e_o * A*V^2 / 4*d
Plug the given values:
U_eq = (3 + 1) * (8.82 * 10^ -12 )* (0.001)*15^2 / 4*0.01
U_eq = 1.99 * 10^(-10) J
These radio waves travel at a speed of 3.00 x 108 m/s.
What is the wavelength of these radio waves?
B) 16 sqrt 2 V
C) 256 V
D) 8
Answer:
A)
Explanation:
Maximum voltage =
Maximum voltage and rms voltage are related to each other by
Answer:
150 hope this helps
Explanation:
Answer:
150
Explanation: