Answer:
45.6°C
Explanation:
Kinetic energy =
Use m= 1.80kg and v=7.80m/s (mass and speed of hammer).
K = 0,5*1.80kg*(7.80m/s)^2 = K=54.8J
Heat is 60% of Kinetic energy. Q = 0.6*54.8J = 32.9J
As it is stuck 10 times the total heat is 10*32.9J = Total Heat = 329J
Use the equation to find change of temperature:
Q = 329J; m = 8.00g of aluminium; C_v = 0.900J/g°C (For aluminium)
Calculating gives Change of Temperature = 45.6°C
Answer:
DE HECHO EL SONIDO DÍ PUEDE ATRAVESAR LAS PAREDES, PERO
CUANDO ENTRA EN LA PARED, EL SONIDO VIAJA MÁS RÁPIDO QUE EN EL
AIRE Y CUANDO SALE DEL OTRO LADO, EL SONIDO VA A UNA
VELOCIDAD ALTA, POR ESTO LSA VOCES SE ESCUCHAN AUNQUE NO
MUY CLARAS.
Explanation:
Answer:
The 8 foot long plank
Explanation: hope this helps :)
Answer:
As per faraday's law the rate of change in magnetic flux linked with a coil will induce EMF in the coil. It is given by
now here as we are closing the switch and then open it alternatively so it will change the value of current in the coil.
This change in current will change the magnetic flux in the coil due to which it will induce EMF in it.
Now by Lenz the the direction of induce current in the coil will always opposite to the causes due to which it is induced.
As we know that when switch is connected to flow the current the direction of induced current is in opposite to the current so that it will oppose the increasing value of current while when we open the switch the induced current is in direction of the current so that it will increase the value of decreasing current in the loop.
The induced emf is in the direction opposite to the direction of current.
Emf is the production of a potential difference in a coil as a result of changes in the magnetic flux passing through it.
When the flux coupling with a conductor or coil changes, electromotive Force, or EMF, is said to be induced.
The rate of change in magnetic flux linked to a coil will induce EMF in the coil, according to Faraday's law.
Now, when we alternately close and open the switch, the current in the coil will change.The magnetic flux in the coil will vary as a result of the change in current, resulting in EMF in the coil.
Now, according to Lenz, the direction of induce current in the coil will always be the polar opposite of the causes.
Hence the induced emf is in the direction opposite to the direction of current.
To learn more about the induced emf, refer to the link;
#SPJ2