Miners find rock that was formed from magma deep underground what type of rock could it be

Answers

Answer 1
Answer:

When the igneous rock is deep underground for many years, it will form into metamorphic rock under extreme pressure and temperature. It could also form into magma when it melts deep beneath the layers of earth or it could form sediments when subjected to weather erosion.


Related Questions

In 2005, the space probe Deep Impact launched a 370 kg projectile into Comet Temple 1. Observing the collision helped scientists learn about the comet’s characteristics. The comet is estimated to have a mass of about 9.0 x 10^13 kg.a. Assuming the estimated mass of the comet at that time was correct, at what distance from the comet’s centre was the gravitational force between the comet and the projectile 32 N? b. Deep Impact also released a probe to fly by the comet and record images of the collision. Determine the strength of the comet’s gravitational field at the probe’s distance of 5.0 x 103 km from the comet.
Describe all the forces acting on an elevator as it moves from rest upward and stops at its floor.
What is the speed of an object at rest? a. 15 km/h b. 0 km/h c. 1 km/h d. This cannot be determined without further information.
What kind of image is formed by an object that is placed beyond the center of curvature on the principal axis of a concave mirror?A. real, inverted, the same size as the object, and at the same distance as the object B. real, inverted, larger than the object, and farther from the mirror than the object C. virtual, upright, left-right reversal, the same size as the object, and at the same distance as the object D. real, inverted, smaller than the object, and closer to the mirror than the object E. virtual, upright, larger than the object, and farther from the mirror than the object
Why does a compass point to the east or west of true north in different locations?

How can you describe the image formed by a plane mirror?

Answers

Look at yourself in a plane mirror and you see your image - it is upright. The image is located on the other side of the mirror since reflected rays diverge upon reflection; when mirrors produce images on the the opposite side of the mirror, the images are said to be virtual. the distance from the object to the mirror.

Answer:

D

Explanation:

If the core of a supernova explosion contains three or more solar masses of matter, the core will most likely become a _____.

Answers

The correct answer to the question you gave above would be a black hole. If the core of a supernova explosion contains three or more solar masses of matter, the core will most likely become a black hole. 

Which of the following factors caused the early atmosphere to become thicker

Answers

Volcanic out-gassing, I had this question yesterday. :p

Which of the following factors caused the early atmosphere to become thicker? volcanic gassing

The resultant resistance of two resistance wires in series combination is 108 ohm and in parallel combination is 24 ohm. find the value of individual resistance.

Answers

Call the two resistors 'x' and 'y'.

In series, the resultant resistance is their sum: x + y = 108
Notice that y = 108 - x.  I think we'll use that very soon.

In parallel, the resultant resistance is (their product) / (their sum) = xy/108 = 24

Multiply each side by 108:

xy = 2,592

Substitute for 'y' :

x(108 - x) = 2,592

108x - x² = 2,592

-x² + 108x - 2,592 = 0

x² - 108x + 2,592 = 0

Use the quadratic formula to find:

x = 72 . . . then y = 108 - 72 = 36
or
x = 36 . . . then y = 108 - 36 = 72

The individual resistors are 36Ω  and  72Ω .


The velocity of a car changes from 20 m/s east to 5 m/s east in 5 seconds. What is the acceleration of the car?

Answers

To solve this remember a=change in v/t, assuming the direction for the velocity, is + positive east. You can calculate it simply by this. A=v/t= A=5-20/5= A=-15/5= A=-3m/s squared. Change in velocity= vf-vi.

The safe load, L, of a wooden beam supported at both ends varies jointly as the width, w, the square of the depth, d, and inversely as the length, l. A wooden beam 3in. wide, 6in. deep, and 11ft long holds up 1213lb. What load would a beam 6in. wide, 3in. deep and 12ft long of the same material support? (Round off your answer to the nearest pound.)

Answers

Answer:

L' = 555.95 lb

Explanation:

Analyzing the given conditions in the question, we get

The safe load, L is directly proportional to width (w) and square of depth (d²)

 also,

L is inversely proportional length (l) i.e L = k/l

combining the above conditions, we get an equation as:

 L = k(wd²/l)

 now, for the first case we have been given

w = 3 in

d = 6 in

l = 11 ft

L = 1213 lbs

 thus,

1213 lb = k ((3 × 6²)/11)

or

k = 123.54 lbs/(ft.in³)  

Now,

Using the calculated value of k to calculate the value of L in the second case  

in the second case, we have

w = 6 in

d =3 in

l = 12 ft

Final Safe load L' =  123.54 × (6 × 3²/12)

or

L' = 555.95 lb

Final answer:

The load that a beam of the given dimensions can support is derived using a joint variation formula. The constant of variaiton is found using the given beam's characteristics, and then applied on the second beam's measurements to find its load. The result is approximately 2025 pounds.

Explanation:

The question is related to joint variation and its principles in mathematics. First, it's necessary to define the equation of the joint variation:
L = k*(w*d^2)/l
where L is the load, w is the width, d is the depth, l is the length, and k is the constant of proportionality. From the information given in the question, we can derive that k equals to 1213 * 11 / (3 * 6^2), which is approximately 135. Then, we substitue the values of the second beam into the equation, w = 6, d = 3, l = 12 and k = 135, to get the load L for the second beam, which equates to about 2025 pounds.

Learn more about Joint Variation here:

brainly.com/question/33421771

#SPJ6