Convert the term of g from m/s2 to cm/s2

Answers

Answer 1

Answer: To convert the acceleration from meters per second squared (m/s²) to centimeters per second squared (cm/s²), you can use the following conversion factor:

1 m = 100 cm

So, to convert from m/s² to cm/s², you need to square this factor because acceleration is in units of length per time squared:

(1 m/s²) = (100 cm/s²)

Therefore, 1 m/s² is equal to 100 cm/s².

Related Questions

What causes an electric current in a wire? A. Electric fields cause atoms to move in the wire. B. Electrons flow because of electrical attraction and repulsion. C. Electrons move because of heat. D. Electrons build up in the wire and create a charge
Is Alfred Nobel the inventor of the Atomic Bomb? A)true B)false
There are _____ levels of cell organization recognized by biologists.
Which concept represents most encompassing aspect of our lives
Energy is measured in Joules (J). Which other quantity is measured in Joules?a. work b. force c. power d. acceleration

Solids are usually more dense than: gases liquids plasmas all of the above

Answers

Yes, this is because particles in a solid there are more particles which are touching. They can only vibrate. But particles in a gas are far apart. This is the same for liquids to.

you toss a bowling ball straight up into the air with a speed of 2.1. how long does it take the bowling ball to reach its highest point?

Answers

I am going to assume 2.1 metres per second and that we're rounding acceleration due to gravity to -10 metres per second squared. At the highest point, velocity is going to be 0. v= intial velocity + acceleration*time, sub in 0 for velocity, 2.1 for initial velocity and -10 for acceleration to get 0= 2.1-10t. Now solve for t. t=0.21 seconds.

Answer:

0.2 s

Explanation:

Apex; good luck all! :)

Which of the following describes when light bounces off a surface

Answers

This is the process of light bouncing off a surface reflection.

Answer:

Its reflection

Explanation:

Light reflects from a smooth surface at the same angle as it hits the surface. For a smooth surface, reflected light rays travel in the same direction. This is called specular reflection. ... Diffuse reflection is when light hits an object and reflects in lots of different directions. Welcome.

If a material is ductile, it is most likely a ____________ . Question 24 options: A. Metalloid B. Noble Gas C. Non-Metal D. Metal E. Ion

Answers

Answer: Option (A) is the correct answer.

Explanation:

It is known that metals are malleable and ductile. Whereas non-metals are neither malleable nor ductile.

On the other hand, metalloids are the elements which contain properties similar to both metals and non-metals.

Therefore, if a material is ductile, it is most likely a metalloid because it is not necessary that ductility is a property shown by metals only.

Wherease like non-metals, noble gases are also neither malleable nor ductile.

A. Metalloid this is your answer plz click brainly-ist

Which of the following statements describes an anticyclone?a. It is an area of low pressure.
b. It is an area of high pressure.
c. It has air masses that meet and rise.
d. It moves in the direction of the Earth’s rotation.

Answers

b.
srry for short answer :)

Answer:

b is the appropriate answer

Explanation:

To use your left hand to determine the direction of the voltage developed in a moving conductor in astationary magnetic field, you must point your
A. thumb in the direction of the electromagnetic force.
B. forefinger in the direction of the motion.
C. forefinger in the direction of the lines of force.
D. thumb in the direction of the magnetic flux.

Answers

Correct answer choice is:

C. forefinger in the direction of the lines of force.

Explanation:

The direction of the force - and consequently the transfer of the wire - can be defined by applying Fleming’s left-hand rule.

The forefinger tends to the direction of the magnetic field. The middle finger points in the course of the current. The thumb supplies the direction of force or movement working on the conductor. Fleming's Left Hand Rule is applied in electronic engines which are utilized in coolers, appliances, printers, etc.

To use your left hand to determine the direction of the voltage developed in a moving conductor in a stationary magnetic field, you must point your forefinger in the direction of the lines of force. The correct option among all the options given in the question is option "C".

Other Questions

What is the density of the block? Assume that the block is 40.0% submerged.First Sketches says block weigh 50g Express the density numerically in grams per cubic centimeter.

A baseball player throws a ball in the air with an initial speed of 50 m/s at an angle of 30 degrees above the horizontal. What is the vertical component of the ballâ€™s initial velocity assuming up is the positive direction?

Which statements about velocity are true?Check all that apply. A. The SI units of velocity are m/s. B. For velocity, you must have a number, a unit, and a direction. C. To calculate velocity, divide the change in the distance by time. D. The symbol for velocity is .

What do we call the minimum energy that is required by an electron to leave the metal target in the photoelectric effect?Select one of the options below as your answer: A. energy function B. minimum function C. work function D. quanta E. electrical energy