9514 1404 393
Answer:
Isabel
Step-by-step explanation:
Gavin saves 28% (given).
Harry saves 1 -3/4 = 1/4 = (1/4)·100% = 25%.
Isabel saves 3/(3+7)·100% = 30%.
Isabel saves the largest fraction of her salary each month.
Answer:
10353
Step-by-step explanation:
The given series is in arithmetic progression since the common difference is same which is 8.
To find the sum of series we can simply apply the formula'
S= n/2( first term + last term)
S is the sum and n is the number of terms
we also need to find the number of terms n
n = (last term- first term)/2 + 1
n= 51
s= 10353
Answer:
946.10 gallons per week
Step-by-step explanation:
1 cm = 0.393701 inch
Width = 5.0m = 196.85 inch
Length = 12.0 m = 472.44 inch
The volume evaporated weekly is given by:
Converting to gallons:
946.10 gallons of water must be added to the pool each week.
To determine the volume of water evaporated from the pool at the El Cheapo Motel, we converted all measurements to a common unit and calculated the volume of water evaporated. The motel has to add approximately 946.13 gallons of water weekly, considering there is no rain.
To answer this question, we first need to convert the measurements to a common unit. Given that the pool is 5.0 m wide and 12.0 m long (a total area of 60.0 m2) and the weekly evaporation is 2.35 inches, we first convert the inches to meters. Since 1 inch is equal to 0.0254 meters, 2.35 inches equals 0.05969 meters.
Then, we calculate the volume of water evaporated in a week, which is calculated by multiplying the surface area of the pool by the depth of the water evaporated. Hence, it's 60.0 m2 * 0.05969 m = 3.58 m3. As 1 m3 is approximately 264.17 gallons, 3.58 m3 equals 946.1296 gallons approximately.
In conclusion, the El Cheapo Motel needs to add around 946.13 gallons of water to their pool on a weekly basis, if there is no rain.
#SPJ3
The maximum value of f(x) is greater than the maximum value of g(x).
B.
The maximum value of g(x) is greater than the maximum value of f(x).
C.
The minimum value of f(x) is greater than the minimum value of g(x).
D.
The minimum value of g(x) is greater than the minimum value of f(x).
b. P(28c. P(X>35)
d. P(X>31)
e. the mileage rating that the upper 5% of cars achieve.
The upper 5% of cars have a mileage rating of 35.805 mpg
Z score is used to determine by how many standard deviations the raw score is above or below the mean. It is given by:
z = (raw score - mean) / standard deviation
Given; mean of 33 mpg and a standard deviation of 1.7
a) For < 30:
z = (30 - 33)/1.7 = -1.76
P(x < 30) = P(z < -1.76) = 1 - 0.8413 = 0.0392
b) For < 28:
z = (28 - 33)/1.7 = -2.94
P(x < 28) = P(z < -2.94) = 0.0016
c) For > 35:
z = (35 - 33)/1.7 = 1.18
P(x > 35) = P(z > 1.18) = 1 - P(z < 1.18) = 1 - 0.8810 = 0.119
d) For > 31:
z = (31 - 33)/1.7 = -1.18
P(x > 31) = P(z > -1.18) = 1 - P(z < -1.18) = 0.8810
e) The upper 5% of cars achieve have a z score of 1.65, hence:
1.65 = (x - 33)/1.7
x = 35.805 mpg
The upper 5% of cars have a mileage rating of 35.805 mpg
Find out more on z score at: brainly.com/question/25638875
Answer:
a) P(X < 30) = 0.0392.
b) P(28 < X < 32) = 0.2760
c) P(X > 35) = 0.1190
d) P(X > 31) = 0.8810
e) At least 35.7965 mpg
Step-by-step explanation:
Problems of normally distributed samples are solved using the z-score formula.
In a set with mean and standard deviation , the zscore of a measure X is given by:
The Z-score measures how many standard deviations the measure is from the mean. After finding the Z-score, we look at the z-score table and find the p-value associated with this z-score. This p-value is the probability that the value of the measure is smaller than X, that is, the percentile of X. Subtracting 1 by the pvalue, we get the probability that the value of the measure is greater than X.
In this question, we have that:
a. P(X<30)
This is the pvalue of Z when X = 30. So
has a pvalue of 0.0392.
Then
P(X < 30) = 0.0392.
b) P(28 < X < 32)
This is the pvalue of Z when X = 32 subtracted by the pvalue of Z when X = 28. So
X = 32
has a pvalue of 0.2776.
X = 28
has a pvalue of 0.0016.
0.2776 - 0.0016 = 0.2760.
So
P(28 < X < 32) = 0.2760
c) P(X>35)
This is 1 subtracted by the pvalue of Z when X = 35. So
has a pvalue of 0.8810.
1 - 0.8810 = 0.1190
So
P(X > 35) = 0.1190
d. P(X>31)
This is 1 subtracted by the pvalue of Z when X = 31. So
has a pvalue of 0.1190.
1 - 0.1190 = 0.8810
So
P(X > 31) = 0.8810
e. the mileage rating that the upper 5% of cars achieve.
At least the 95th percentile.
The 95th percentile is X when Z has a pvalue of 0.95. So it is X when Z = 1.645. Then
At least 35.7965 mpg
Answer:
The answer is 53 cm2 or c.
(B) What is the least squares regression line
(C) According to the model in (b), for every increase of $1000 in income, the ulcer rate (per 100 population) will go down by _________ points.
Answer:
B) y = -9.98×10⁻⁵ x + 13.95
C) 0.1
Step-by-step explanation:
Using Excel, the least squares regression line, rounded to two decimal places, is y = -9.98×10⁻⁵ x + 13.95.
The slope is -9.98×10⁻⁵, so if x increases by 1000, then y changes by -9.98×10⁻² = -0.0998. Rounded to one decimal place, the ulcer rate per 100 population will go down by 0.1 points.