Answer: MS-DOS
Explanation:
Answer:
Energy and Power Technology
Explanation:
Energy and Power Technology is a field in engineering that typically deals with generation, transmission and distribution of electric energy to the end users. This energy are usually transmitted and distributed through the use of overhead cables running from the point of generation to the location of the end users.
Natural disasters such as hurricane, tornadoes, earthquake, etc., are capable of destroying the power lines (cables) as they are usually hung on poles.
In this scenario, Sean is a lineman who is always on call to travel whenever there is a natural disaster. He has recently been called to help repair downed power lines for those who have been affected by a hurricane. Therefore, the Energy cluster pathway that Sean works in is Energy and Power Technology.
Answer:
The three bulbs can be connected in series to the battery B1, such that when switch SW1 is turned ON all three bulb turns ON with the same brightness. We now have the three resistors R1, R2, and R3 connected in parallel to the lamps LMP1, LMP2, and LMP3 respectively when SW2 turn on. SW2 is a Three Pole Single Throw switch. Please see attachment for the electric circuit diagram.
Explanation:
QUESTION
How do you make a circuit so 1 switch will turn on/off all the lights(3 lights) and a second switch will change the lights from all being the same brightness to all being different brightness?
ANSWER
List of Component Used For The Design Of The Electric Circuit
The three bulbs can be connected in series to the battery B1, such that when switch SW1 is turned ON all three bulb turns ON with the same brightness. We now have the three resistors R1, R2, and R3 connected in parallel to the lamps LMP1, LMP2, and LMP3 respectively when SW2 turn on. SW2 is a Three Pole Single Throw switch. Please see attachment for the electric circuit diagram.
1. 18Volt Battery ( two 9 Volts batteries connected in series)
2. Three Filament lamps LMP1=LMP2=LMP3= 6V 6W.
3. Three resistors of R1=100Ω, R2=12Ω and R3=3Ω
4. SPST Switch =SW1
5. TPST Switch = SW2
Since the battery is 18V and connected in series to all three lamps, it is capable of delivering 6V per lamp. Each lamp is 6W. So the resistance of the bulb can be determined using Ohm’s law.
V=IR, P=IV = V2/R, R=V2/P
Where I= Current
V= Voltage
R= Resistance
P = Power
Lamp Resistance RL= 62/6 =6Ω
Total resistance of the lamps connected in series Rs= 6+6+6 = 18Ω
The total current through the series resistor combination IS = Battery supplied voltage divide by RS =18/18 =1A
So each lamp will dissipate power PL= I2*R= 1*6 =6W
When switch SW2 is closed, there is now a resistor connected in parallel to each of the lamp which will now reduce the total resistance combination of the lamp and resistors to a values lower than 6Ω
Lamp1 has 100Ω connected in parallel to it to give a total resistance of 5.66Ω
Lamp2 has 12Ω connected in parallel to it to give a total resistance of 4Ω
Lamp3 has 3Ω connected in parallel to it to give a total resistance of 2Ω
The new total resistance of the circuit is now R=5.66+4+2 = 11.66Ω
The new total current flowing through the circuit I=18/11.66 = 1.54A
The power dissipated by each lamp with a new series current of 1.54A can now be recalculated as follows;
Power dissipated by Lamp 1 P1= 1.542*5.66Ω = 13.42W
Power dissipated by Lamp 2 P2= 1.542*4Ω = 9.49W
Power dissipated by Lamp 1 P1= 1.542*2Ω = 4.74W
From the power dissipated by the 3 bulbs, we can see that lamp 3 is bright, lamp 2 is brighter and Lamp 1 is the brightest of all the three lamps.
Answer:Unconditional positive regard
Explanation:Unconditional positive regard is an expression of feeling which is usually referred in the case that focuses on the client therapy mostly. It is the emotion that describes about a person having no expectation in return toward their feeling and being supportive and respectful towards the client.
The therapist is also displaying this emotion from his side towards the client irrespective of the client's emotion .
a. True
b. False
Answer:
True
I just got the same question correct on OddyseyWare
Answer: Green business
Explanation:
Green business is also referred to as the sustainable business, and it's a business which has a minimal negative impact on the environment.
Green industry businesses aim to use little energy, water, and other resources while cutting carbon emissions. The resources that are used are utilized in eco-friendly ways.
Since Jason works for a restaurant that serves only organic, local produce, the business can said to be a green business.