Brendon sells tires at the local auto parts store. He told a customer that the tire width for a new tire was 21.5 centimeters. Which of the following describes the tire width for the new tire? Help please thank you!!!

Answers

Answer 1
Answer:

Answer:

215 mm

Step-by-step explanation:

1 cm = 10 mm

21.5 cm * (10 mm)/(1 cm) = 215 mm

Answer: 215 mm


Related Questions

HELP!!!!Carissa takes a square piece of cardboard and cuts 5 in. by 5 in. squares out of each corner. She folds the sides up to make a box without a top. What equation can Carissa use to determine the volume of the box, where x is the side length of the original piece of cardboard? Express the equation in standard form.
What is the midpoint of AB if A(6,-2) and B(10,4)
After 3 hours, a bacteria colony has (25^3)^3 bacteria present. How many bacteria are in the colony
Suppose the volume of milk in a glass is 230 cubic cm. If 1 gallon of milk equals 3.79 liters, how many glasses of milk are in 1 gallon
Which pair is a base and corresponding height for the triangle?A. b = 16 units and h = 9.6 unitsB. b = 20 units and h = 16 unitsC. b = 20 units and h = 9.6 unitsD. b = 20 units and h = 12 units

I don't understand help??? Asap!

Answers

Your answer is C) Translation

Greg drew a pair of parallel lines and a line segment next to each other on a chalkboard.Which of these statements best compares the pair of parallel lines and the line segment?
A.Parallel lines and the line segment have no dimensions of measurement.
B.The parallel lines and the line segment always meet at a common endpoint which is called the vertex.
C.Parallel lines and a line segment cannot lie on the same plane at the same time because they do not overlap.
D.The parallel lines extend infinitely in both directions, and the line segment has two endpoints.

Answers

Greg drew a pair of parallel lines and a line segment next to each other on a chalkboard. The statement that best compares the pair of parallel lines and the line segment is D. The parallel lines extend infinitely in both directions, and the line segment has two endpoints.

Two black chips and three red chips are put into a bag. Two points are awarded for each black chip drawn, and one point is lost for each red chip drawn. What is the expected value for each round if there are two draws per round and the chips are replaced after each draw?

Answers

The answer is 0.4.

The values are:
- for the black chip : x₁ = 2
- for the red chip: x₂ = -1

Let's first calculate the possibilities of each chip. There are in total 5 chips (two black chips and three red chips) in the bag
 
- the possibility to draw the black chip is 2 out of 5:    P₁ = 2/5
 - the possibility to draw the red chip is 3 out of 5:       P₂ = 3/5

In this example we have 4 different events:
1. Drawing of two black chips: P₃ = P₁ · P₁ = 2/5 · 2/5 = 4/25
2. Drawing of one black chip and then one red chip: P₄ = P₁ · P₂ = 2/5 · 3/5 = 6/25
3. Drawing of one red chip and then one black chip: P₅ = P₂ · P₁ = 3/5 · 2/5 = 6/25
5. Drawing of two black chips: P₆ = P₂ · P₂ = 3/5 · 3/5 = 9/25


Therefore, the expected value for each round if there are two draws per round and the chips are replaced after each draw is 0.4:
P = (x
₁ + x₁) · P₃ + (x₁ + x₂) · P₄ + (x₁ + x₂) · P₅ + (x₂ + x₂) · P₆
P = (2+2) · 4/25 + (2-1) · 6/25 + (2-1) · 6/25 + (-1 + -1) · 9/25
P = 4 · 4/25 + 1 · 6/25 + 1 · 6/25 + -2 · 9/25
P = 16/25 + 6/25 + 6/25 - 18/25
P = 28/25 - 18/25
P = 10/25 = 0.4

Answer:

0.4 is correct

Step-by-step explanation:

Which transformations will produce similar, but not congruent, figures?Choose all answers that are correct.


A.


Square ABCD is rotated 270° clockwise and then dilated by a scale factor of 1/3 to form square AꞌꞌBꞌꞌCꞌꞌDꞌꞌ.


B.


Square ABCD is reflected across the x-axis and then dilated by a scale factor of 2 to form square AꞌꞌBꞌꞌCꞌꞌDꞌꞌ.


C.


Square ABCD is dilated by a scale factor of 4/5 and then translated 1 unit right to form square AꞌꞌBꞌꞌCꞌꞌDꞌꞌ.


D.


Square ABCD is translated 8 units right and 8 units up and then reflected across the y-axis to form square AꞌꞌBꞌꞌCꞌꞌDꞌꞌ.

Answers

Which transformations will produce similar, but not congruent, figures?
Square ABCD is rotated 270° clockwise and then dilated by a scale factor of 1/3 to form square AꞌꞌBꞌꞌCꞌꞌDꞌꞌ.
Square ABCD is dilated by a scale factor of 4/5 and then translated 1 unit right to form square AꞌꞌBꞌꞌCꞌꞌDꞌꞌ.
Square ABCD is translated 8 units right and 8 units up and then reflected across the y-axis to form square AꞌꞌBꞌꞌCꞌꞌDꞌꞌ.
The answers are letters A, C and D

What is the value of the product (3 - 2i)(3 + 2i)

Answers

Answer:

13

Step-by-step explanation:

(3 - 2i)(3 + 2i)

FOIL

first  3*3 = 9

outer 3*2i = 6i

inner -2i*3 = -6i

last  -2i * 2i = -4i^2 = -4(-1) =4

Add together

9+6i-6i+4 = 13

The elevation of lake sam rayburn is 164 above mean sea level during the summer if it does not rain the elevation of the lake decreases by 0.5 feet each week

Answers

Answer:

I guess that you want to model the elevation of Lake Sam Rayburn.

During the summer, it is 165 ft above the sea level (the sea level is our position 0ft).

If it does not rain, the elevation of the lake decreases by 0.5ft each week.

So if we assume that there is no rain, we can write the elevation fo the lake as a linear relationship with slope equal to -0.5ft and y-intercept equal to 165ft.

L(w) = 165ft - 0.5ft*w

Where w is the number of weeks without rain, if we have 0 weeks without rain, then the level of the lake remains constant at 165ft above sea level,

L(0) = 165ft - 0.