Answer:
There are approximately 16 dozes in the final product
Explanation:
The given parameters are;
The viscous lidocaine 2% 30 mL + Maalox 60mL + Diphenhydramine (12.5 mg/5mL elixir)75 mg + Carafate 1gm/10mL 40mL
The total volume becomes;
30 mL + 60 mL + 5 × 75/12.5 mL + 40 mL = 160 mL
1 Teaspoon = 4.928922 mL
Therefore, 2 teaspoon = 2 × 4.928922 mL = 9.857843 mL
Which gives;
The number of doses in 160 mL = 160 mL/(9.857843 mL) = 16.2307312 doses
Which is approximately 16 doses
Therefore, there are approximately 16 dozes in the final product.
The final product contains viscous lidocaine, Maalox, diphenhydramine, and Carafate. There are approximately 10.5 doses in the final product.
The final product is a mixture of viscous lidocaine, Maalox, diphenhydramine, and Carafate. The doctor wants the patient to use a daily dose of 2 teaspoons.
To calculate the number of doses in the final product, we need to determine the total volume of the mixture and divide it by the volume of a single dose.
First, add the volumes of the individual components: 30 mL + 60 mL + 75 mg + 40 mL = 105 mL
Since the doctor wants the patient to use 2 teaspoons (10 mL) per dose, divide the total volume of the mixture (105 mL) by the volume of a single dose (10 mL): 105 mL ÷ 10 mL = 10.5 doses
Therefore, there are approximately 10.5 doses in the final product.
For more such questions on doses, click on:
#SPJ3
Answer: When rain falls on the land, it either seeps into the ground or becomes runoff, which flows downhill into rivers and lakes, on its journey towards the seas. As small creeks flow downhill they merge to form larger streams and rivers. Rivers eventually end up flowing into the oceans.
Explanation:
(B) exhaust
(C) oil filter
(D) tires
Answer:
Tires.
Explanation:
There are the few steps which are discussed below should be taken to increase or extend the life of tires.
(1) Avoid fast starts: Fast start of the vehicle will increase the pressure on the tires due to the friction between the tires and the road will decrease the life of tires.
(2) Avoid fast stop: Fast stop of the vehicle will also increase the pressure on the tires due to the friction between the tires and the road will decrease the life of tires.
(3) Avoid sharp turns: The alignment of the wheels and tires are in such a way that they work properly when vehicle is drive in a straight path but sharp turn will increase the uneven pressure on the tires will lead to decrease the life of tires.
Therefore, the life of tires can be extend by avoiding all the above mention actions such as fast stop, start and sharp turns.
The life of tires can be extended by avoiding fast starts, stops and sharp turns. These maneuvers cause excessive friction which leads to quicker deterioration. Suitable driving habits can extend the life of the tires.
You can extend the life of your tires by avoiding fast starts, stops, and sharp turns. When a driver performs a fast start, a large amount of friction is produced between the tires and the road, causing the tires to wear faster. The same goes for abrupt stops and sharp turns, which also produce an excess amount of friction, leading to a quicker deterioration of the tires.
Therefore, to extend the life of your tires, it is advisable to drive in a cautious and considerate manner, avoiding fast starts and stops and refraining from making sharp turns whenever possible.
#SPJ3
Answer:
Static Friction is acting upon the book
A.
It increases as it travels from its maximum amplitude to its resting point.
B.
It decreases as it travels from its maximum amplitude to its resting point.
C.
It remains the same throughout the period.
D.
It decreases at the arm, but increases at the pivot point
Answer:
98.13m
Explanation:
Complete question
Daniel is 50.0 meters away from a building. Tip of the building makes an angle of 63.0° with the horizontal. What is the height of the building
CHECK THE ATTACHMENT
From the figure, using trigonometry
Tan(θ ) = opposite/adjacent
Where Angle (θ )= 63°
Opposite= X = height of the building
Adjacent= 50 m
Then substitute the values we have
Tan(63)= X/50
1.9626= X/50
X= 1.9626 × 50
X= 98.13m
Hence, the height of the building is 98.13m