PHYSICS HIGH SCHOOL

Objects in a composition occupy ____________.a. negative space
c. symbolic form
b. the forefront
d. positive space

Answers

Answer 1

Answer:

Answer:

D. Positive space

Step-by-step explanation:

We are given that,

'Objects in a composition occupy ___'.

We know that,

In a composition the space occupied by the given object is known as the positive space, whereas any space around the object is known as the negative space.

So, we get that,

Objects in a composition occupy positive space.

Thus, option D is correct.

Answer 2

Answer: Objects in composition occupy a positive space.

Related Questions

A lunar day is __________ in duration.
A 1250 kg Nascar is at the starting line. The race starts and the car reaches a speed of 30m/s in 10 seconds. What is the force of the car? (Hint: Remember that accelerationchange in velocity / time.)
_______ are atoms that carry an electric charge. A. Nonelectrolytes B. Colloids C. Electrolytes D. Ions
A car travelling at 32 m/s decelerates at a rate of 6 m/s ^ 2 over 4 secondsWhat is the final velocity the car
What is the law of inertia?

Draw a diagram to show how two resistors R1 and R2 are connected in parallel.

Answers

See attached
--------------------------------

What do scientists believe the moon’s core might be formed of?a. Iron
c. Carbon
b. Silicon
d. Lava

Answers

Answer:

A. Iron.

Explanation:

The Moon´s core is smaller in comparison with other terrestrial bodies. About 20% of the entire mass of it is the core.

The moon is composed of distinct crust, mantle, and core. While the crust is composed of freeze magma the core is believed to be formed by a mixture of metallic iron with a small amount of sulfur and nickel.

I hope this answer helps you.

Scientists believe the moon’s core might be formed of iron.

Which court would you go to if you wanted to declare bankruptcy?A.
Civil court
B.
U.S. Court of Appeals
C.
Supreme Court
D.
U.S. District Court

Answers

Civil court would you go to if you wanted to declare bankruptcy. The correct option is A.

Thus, According to the United States Bankruptcy Code, bankruptcy proceedings are typically filed in a federal bankruptcy court.

The federal court system includes these courts, which deal with Chapter 7, Chapter 11, and Chapter 13 bankruptcy cases.

The additional alternatives (U.S. Court of Appeals, Supreme Court, and U.S. District Court) are not the main courts where bankruptcy cases are generally filed.

Thus, Civil court would you go to if you wanted to declare bankruptcy. The correct option is A.

Learn more about Civil court, refer to the link:

brainly.com/question/29614273

#SPJ3

Answer:

A. Cilvil court.........

A lamp can work on 50V mains taking 2 amps. What value of resistance must be connected in series with it, so that it can be operated from 200V mains giving the same power?

Answers

The resistance of the lamp is apparently 50V/2A = 25 ohms.

When the circuit is fed with more than 50V, we want to add
another resistor in series with the 25-ohm lamp so that the
current through the combination will be 2A.

In order for 200V to cause 2A of current, the total resistance
must be 200V/2A = 100 ohms.

The lamp provides 25 ohms, so we want to add another 75 ohms
in series with the lamp. Then the total resistance of the circuit is
(75 + 25) = 100 ohms, and the current is 200V/100 ohms = 2 Amps.

The power delivered by the 200V mains is (200V) x (2A) = 400 watts.

The lamp dissipates ( I² · R ) = (2² · 25 ohms) = 100 watts.

The extra resistor dissipates ( I² · R) = (2² · 75 ohms) = 300 watts.

Together, they add up to the 400 watts delivered by the mains.

CAUTION:
300 watts is an awful lot of power for a resistor to dissipate !
Those little striped jobbies can't do it.
It has to be a special 'power resistor'.
300 watts is even an unusually big power resistor.
If this story actually happened, it would be cheaper, easier,
and safer to get three more of the same kind of lamp, and
connect THOSE in series for 100 ohms. Then at least the
power would all be going to provide some light, and not just
wasted to heat the room with a big moose resistor that's too
hot to touch.

Fossil fuels currently account for the majority of the world’s energy use because they are A. distributed evenly throughout the world. B. nonpolluting. C. renewable energy resources. D. relatively inexpensive and readily available

Answers

Answer: D. relatively inexpensive and readily available

Fossil fuels are non-renewable sources of energy these resources formed by the geological processes occurring in the earth. It takes millions of years for their formation. These includes coal, petroleum, and natural gas. Unfortunately, the distribution of these resources is not even in the regions of the world but efforts have been done by the humans to make them available everywhere. They are relatively inexpensive and readily available this contributes to the majority of the world's energy use.

Fossil fuels currently account for the majority of the world’s energy use because they are relatively inexpensive and readily available.

In short, Your Answer would be Option D

Hope this helps!

I WILL GIVE BRAINLIEST Which two measurements are needed to calculate the velocity of an object?
A. Displacement
O B. Time
C. Acceleration
D. Average speed

Answers

Final answer:

To calculate velocity in Physics, the two necessary measurements are displacement and time. Velocity is the speed in a specified direction, determined by dividing displacement by time.

Explanation:

In the field of Physics, the two measurements needed to calculate the velocity of an object are displacement and time. Velocity refers to the speed in a given direction and is calculated by dividing displacement (which gives direction information and distance) by the time it takes to move that distance. For example, if an object traveled 100 meters to the north in 20 seconds, the velocity would be 5 meters per second towards the north.