Answer: Option d: ideas of space travel.
Explanation:
Leonardo da Vinci was an Italian. He had numerous skills in various different fields. Leonardo contributed to technology for the effect of moon on the tides, his theory on formation of continents, human anatomy, art and much more. But he did not contribute in the ideas for space travel. Hence, the correct option is d.
Answer:D
Explanation:
c. Enthalpy
b. Fusion
d. Gibbs energy
Answer:
To decrease the current;
1) Use fewer loops or number of turns
2) Use a lower speed of rotation of the coil in the magnetic field
3) Use a weaker magnetic
Explanation:
According to Faraday's Law of induction, which is the basis of the electromagnetism, electromagnetic induction and therefore the basis of the electric generator, can be written as follows;
Where;
ε = The induced voltage
N = The number of turns (loops)
ΔФ = The change in the magnetic flux
Δt = The change in the time (the duration)
Given that voltage is directly related to the current, decreasing the voltage, decreases the current
To decrease the voltage, and therefore, the current we can;
1) Reduce the number of loops in the coil
2) Increase the time change per unit change in flux by slowing down the speed of rotation of the generator
3) Decrease the amount of change in the magnetic field per turn, by using a weaker magnetic
wire has a resistance of 1.3 ohms. The crosssectional
area of this wire is
(1) 7.9 × 10^−8 m2 (3) 4.6 × 10^0 m2
(2) 1.1 × 10^−7 m2 (4) 1.3 × 10^7 m2
The cross-sectional area of the copper wire is which has 1.3 ohm at 20 degree Celsius during laboratory experiment by student is 7.9×10⁻⁸ ohm.
Resistance is obstacle for the current flow in the circuit. It is the measure of reverse act to current flow in through a material. It can be given as,
Here, (ρ) is the specific resistance (l) is the length of the wire and (A) is the cross-sectional area of the wire.
During a laboratory experiment, the student finds that at 20° Celsius, a 6.0-meter length of copper wire has a resistance of 1.3 ohms.
The value of resistivity of copper wire is 1.72×10⁻⁸ ohm-m. Put these values in the above formula as,
Thus, the cross-sectional area of the copper wire is which has 1.3 ohm at 20 degree Celsius during laboratory experiment by student is 7.9×10⁻⁸ ohm.
Learn more about the resistance here;
ρ = resistivity of copper at 20 °C = 1.72 x 10⁻⁸ ohm-m
R = resistance of the copper wire = 1.3 ohm
L = length of the copper wire = 6 meter
A = area of cross-section of the copper wire = ?
Resistivity of copper wire is given as
R = ρL/A
inserting the values in the above equation
1.3 = (1.72 x 10⁻⁸) (6)/A
A = 7.9 x 10⁻⁸ m²
Hence the correct choice is
(1) 7.9 x 10⁻⁸ m²
If the speed of an object is tripled, its kinetic energy will be 9 times the initial value.
The kinetic energy of an object is the energy possessed by the object due to its motion.
K.E = ¹/₂mv²
where;
m is mass of the object
v is speed of the object
K.E = ¹/₂m(3v)²
K.E = 9(¹/₂mv²)
Thus, if the speed of an object is tripled, its kinetic energy will be 9 times the initial value.
Learn more about kinetic energy here: brainly.com/question/25959744
#SPJ2