Answer:
Time period = 41654.08 s
Explanation:
Given data:
Internal volume is 210 m^3
Rate of air infiltration
length of cracks 62 m
air density = 1.186 kg/m^3
Total rate of air infiltration
total volume of air infiltration
Time period
Answer:
See explaination
Explanation:
See attachment for the detailed step by step solution of the given problem.
Answer & Explanation:
When circuit switching is used, maximum 15 circuit switched user can be supported. Because for each of the user is allocated 10 MBPS bandwidth, and given link capacity is 150 MBPS.
Answer and Explanation:
The main objective that the torsion test serves is the determination of the material behavior or the behavior of the test sample when subjected to torsional stresses or forces due to the application of moments that results in shear stress along the axis.
Plasticity is the property of elastic material and tension or shear stresses leads to plasticity in a material where these links are the weakest, that gives torsion test a major advantage over the tension test.
Torsion tests are performed on materials to deduct properties like the shear modulus of elasticity, the torsional strength, and the MOR, i.e., Modulus of Rupture.
This test can be used to obtain larger strain values of strain without any complexity as that in tension test.
This test provides a curve of shear-stress-shear strain which is more significant in determining the plasticity as compared to the curve of stress-strain in tension test.
Maximum torque for a given value of maximum stress will be 2 times higher in torsion as that of tension.
In torsion, for plastic flow, the threshold value of shear stress is achieved before the threshold value of normal stress for fracture whereas in tension the critical value of normal stress is achieved sooner than the critical shear for plastic flow.
Answer:
Ergr5
Explanation:
Explanation:
Step1
Absolute pressure is the pressure above zero level of the pressure. Absolute pressure is considering atmospheric pressure in it. Absolute pressure is always positive. There is no negative absolute pressure.
The expression for absolute pressure is given as follows:
Here, is absolute pressure,
is gauge pressure and
is atmospheric pressure.
Step2
Gauge pressure is the pressure that measure above atmospheric pressure. It is not considering atmospheric pressure. It can be negative called vacuum or negative gauge pressure. Gauge pressure used to simplify the pressure equation for fluid analysis.
Who is right?
Technician A says that the unitized structure of a hybrid vehicle is considerably different when compared to the same conventional model is right.
Hybrid vehicle are defined as a powered by a combustion engine and/or a number of electric motors that draw power from batteries. A gas-powered car simply has a traditional gas engine, but a hybrid car also features an electric motor.
One important advantage of hybrid cars is their capacity to reduce the size of the main engine, which improves fuel efficiency. Many hybrid vehicles employ electric motors to accelerate slowly at first until they reach higher speeds. They then use gasoline-powered engines to increase fuel efficiency.
Thus, technician A says that the unitized structure of a hybrid vehicle is considerably different when compared to the same conventional model is right.
To learn more about hybrid vehicle, refer to the link below:
#SPJ5