What is the purpose of the Climate Friendly Farming Project?

Answers

Answer 1
Answer: The Climate Friendly Farming Project was designed to provide funding for long term research into the sustainability and adaptability of agricultural systems(wheat, vegetables, and dairy systems) as increasing greenhouse gases propagate and decline the efficiency of current agricultural practice.
Answer 2
Answer:

Answer:

The purpose of the Climate Friendly Farming Project is to create a database of climate friendly agricultural practices

Explanation:

Edge


Related Questions

Which situations contain unbalanced forces? Check all that apply.
Which electrical protective device is designed to detect a difference in current between circuit wires and interrupt the circuit and stop the flow of electricity? (1 point)a. GFCI b. Circuit breaker c. Fuse d. Insulation
Higher-frequency sound waves are perceived as having _____.A. higher pitch B. lower pitch C. higher volume D. lower volume
Calculate the accleration of a 25-Kg object that moved with force of 300 N
Astronauts traveling toward Earth in a fastmovingspacecraft receive a radio signal from anantenna on Earth. Compared to the frequencyand wavelength of the radio signal emitted fromthe antenna, the radio signal received by theastronauts has a(1) lower frequency and a shorter wavelength(2) lower frequency and a longer wavelength(3) higher frequency and a shorter wavelength(4) higher frequency and a longer wavelength

How much energy is contained in the mass of a 60-kilogram person?

Answers


I could tell you the energy if you can tell me the acceleration and height above earth's surface.

the energy in the body depends on the work that had done and the type of food he she had if it is in a 60 kg person / 40 kg person.

If the sun rises at 5 am and sets at 6 pm, what is the length of the day? a) 11 hours b) 12 hours c) 13 hours d) 24 hours

Answers

Answer:

24 hours

Explanation:

What is the difference in the charges on a ballon rubbed in your hair and a glass rod rubbed

Answers

The balloon steals electrons from your hair, leaving the hair positively charged, and the balloon negatively charged. It causes hair to be apart from each other, because it has the same charge. Glass has a weaker hold on electrons, and silk absorbs the lost electrons.

The acceleration due to gravity for an object on the surface of the Earth is g. The distance from the Earth to the Moon is roughly 60 RE, where RE is the radius of the Earth. What is the centripetal acceleration of the moon during its (roughly circular) revolution around the Earth

Answers

Answer:

The centripetal acceleration that the moon experiences will be almost equal to the gravitational force that the Earth does in the moon,

Now, remember these two things:

F = m*a

and Fg = G*M1*M2/r^2

the first equation says that the force applied to something is equal to the mass of the object times the acceleration.

The second equation is for the gravitational force, where G is a constant, M1 and M2 are the masses of both objects, in this case, the Earth and the moon, and r is the distance.

We know that the acceleration in the surface of the Earth is:

a = Fg/M2 = g = G*M1/(RE)^2

now, for the moon we will have:

a = G*M1/(60RE)^2 = (G*M1/(RE)^2) *(1/60^2)

Here the term in the left is equal to g, so we have:

(G*M1/(RE)^2) *(1/60^2) = g*(1/60^2)

So the centripetal acceleration of the moon is 60^2 = 3600 times smaller than g.

A coil of insulated wire is wound many times around an iron bar. The wire is connected to a battery and a contact switch. The contact switch is alternately flipped closed and left closed, so the wire carries a current through it, and then flipped open and left open, so that the current stops. Describe what magnetic fields are created, if those magnetic fields in turn induce an emf, and whether the induced emf is in the direction of the original current or opposite to it. Justify your answer using Lenz's law and the conditions which can cause a magnetic field to induce an emf. You may draw a diagram if it helps you to visualize the apparatus.

Answers

Answer:

As per faraday's law the rate of change in magnetic flux linked with a coil will induce EMF in the coil. It is given by

E = - (d\phi)/(dt)

now here as we are closing the switch and then open it alternatively so it will change the value of current in the coil.

This change in current will change the magnetic flux in the coil due to which it will induce EMF in it.

Now by Lenz the the direction of induce current in the coil will always opposite to the causes due to which it is induced.

As we know that when switch is connected to flow the current the direction of induced current is in opposite to the current so that it will oppose the increasing value of current while when we open the switch the induced current is in direction of the current so that it will increase the value of decreasing current in the loop.

The induced emf is in the direction opposite to the direction of current.

What is induced emf?

Emf is the production of a potential difference in a coil as a result of changes in the magnetic flux passing through it.

When the flux coupling with a conductor or coil changes, electromotive Force, or EMF, is said to be induced.

The rate of change in magnetic flux linked to a coil will induce EMF in the coil, according to Faraday's law.

Now, when we alternately close and open the switch, the current in the coil will change.The magnetic flux in the coil will vary as a result of the change in current, resulting in EMF in the coil.

Now, according to Lenz, the direction of induce current in the coil will always be the polar opposite of the causes.

Hence the induced emf is in the direction opposite to the direction of current.

To learn more about the induced emf, refer to the link;

brainly.com/question/16764848

#SPJ2

Statement. H,, and are distinct points that are coplanar.

Answers

Answer:

Explanation:

The statement "H, M, and N are distinct points that are coplanar" means that:

1. "H," "M," and "N" are specific points in space.

2. These points are different from each other, meaning they do not coincide or overlap.

3. All three points lie within the same plane. In other words, they share a common flat surface or two-dimensional space.

This statement is often used in geometry and mathematics to describe the relative positions of points in a two-dimensional space or on a flat surface. It indicates that these points can be represented on the same plane, and their relationships, distances, and angles can be analyzed within that plane.